---

Box (radio shack 6x2x3) for under console light. 12v accessory socket in console	grab bar on sliding hatch	relocated daggerboard line cleat (aft). Added jam cleat foward of daggerboard cleat. Also note cleat for mainsail line	Harken cleat mounted for main halyard on top of stock daggerboard cleat.
harken block for main halyard aft. Mounted in deck plate	another view of block and holes drilled for block	fore view of cleats - starboard side	Solar vent in hatch
12v faucet - pump mounted next to water tank	new fuse panel and separate exterior light panel (running, sail, foredeck, anchor)	inside hatch vent - rubber bumper installed	fire ext. zip tied to stair - for now
winch handle holder - mounted to existing screws in trim	vhf mounted above galley	Preventer - using original mainsheet blocks (from boats4sail). Can also be used as a vang	eye mounted to mast for vang use
upgraded stainless mainsheet blocks (boats4sail)	upgraded stainless mainsheet blocks (boats4sail)	pvc pipe w/ cap installed over original guide poles 1.5" x 5'	pvc pipe w/ cap installed over original guide poles 1.5" x 5'
bow bunk roller installed. Wood blocks broke upon last recovery..added this to prevent that and guide boat in.	under-console led light. controlled by switch at helm

---