Welcome To Digital Satellite Receiver (DVB-S) and Digital Cable Receiver (DVB-C) Software Support Page
At here you will found the firmware and utility
Digital Satellite Receiver (DVB-S)
Flash-file Installation by Flashwizard
- Check IP address of dreambox by do following step
- At Dreambox remote control press “Menu” button and move cursor “(6) Set up” and press “OK” button on remote control
- move cursor to “Expert Setup” and Press “OK” button on remote control
- move cursor to “Communication Setup” and press “OK” button
- At “Communication setup” page, See at IP Address (first line)
- Download Program from http://www.dreamboxworld.org/dbw/tool/Dreambox%20For%20Ever.zip
- unzip file and you will found “Dreambox for ever.exe”
- Double click at Dreambox for ever.exe for open program
- Then click at “Flashwizard
- and it will have a new window for Flashwizard program then click at left-bottom button “Configuration and Utilities”
- the put IP address that you read from dreambox enter in “IP” section
- Then click at left-top button (“Install a firmware into FLASH memory”)
- then click at yellow folder button
- go to the place that store the file “john1.fw2” (the file that attach with e-mail)
- then click at “yes” button
- wait for program install firmware into dreambox
- Click at “OK” Button
- then power off the dreambox and power on dreambox if dreambox is show TV System Wizard you have to redo all process again by go back start from section (1) but if it already show tv channel (Thai TV3) then it finish
Viaccess - Seca2 – CryptoWorks – Irdeto – Conax Infocast Services included !!!NEW!!!!
- Update via smartcard :
Loader + Sc1_XM_XS_ICM_RC2f_All_40A0_4082.BIN + Sc2_XM_XS_ICM_RC2f_All_40A0_4082.BIN (04/11/04)Warning: we advice you to load the last version of the STI fw http://www.neotionbox.com/neotionboxdownload-gb.html in order to get benefit of Infocast Services
- Update RS232 :
Sc1_XM_XS_ICM_RC2f_All_40A0_4082.BIN + Sc2_XM_XS_ICM_RC2f_All_40A0_4082.BIN (04/11/04)
Switch on your NEOTION Box and go to the Receiver Information menu. The first line is entitled SW version and begins by AVSA, AVSB or AVSD followed by a number. You can know the firmware you must take :
|
NB1000 RC2 Model with FreeX-TV reception on Hotbird and Astra
Viaccess - Seca - CryptoWorks - Irdeto Ready for Full-X smartcard
Update smartcard :
Loader +
NB1000_RC2f_europe_X_sc_10043a (01/03/04)
Update RS232 (take the 2 files):
1_NB1000_RC2f_europe_X_10043a +
2_NB1000_RC2f_europe_X_10043a (01/03/04)
Seca2 auto-update - seca2 titanium (SkyItalia) - ZeeTV
(test version, not final version) Ready for Full-X smartcard
Update smartcard :
Loader +
SC_NB1000RC2f_FM_XM_SCS_10047a (30/03/04)
Update RS232 (take the 2 files):
1_NB1000RC2f_FM_XM_SCS_10047a +
2_NB1000RC2f_FM_XM_SCS_10047a (30/03/04)
NB1000 RD2 Model with FreeX-TV reception on Hotbird and Astra
Seca2 auto-update - seca2 titanium (SkyItalia) - ZeeTV
(test version, not final version) Ready for Full-X smartcard
Update smartcard :
Loader +
SC_NB1000_FM_XM_SCS_RD2_10847a (30/03/04)
Update RS232 :
Ser_NB1000_FM_XM_SCS_RD2_10847a (30/03/04)
NB1000 RC2 Model with FreeX-TV reception on NSS6 (south east asia)
Update smartcard :
Loader +
NB1000_RC2_asia_flash_smartcard (20/01/04)
NB1000 RD2 Model with Full-X reception
Viaccess - Seca (auto update) - CryptoWorks – Irdeto (including NOVA) Ready for Full-X smartcard
Update smartcard :
Loader +
sc_NB1000_RD2_X_SCS_v2088Da (18/05/04)
Switch on your NEOTION Box and go to the Receiver Information menu. The first line is entitled SW version and begins by SA or SB followed by a number. You can know the firmware you must take :
|
NB2000 RD2 Model with Full-X reception (same FW than NB1000 RD2 Model with Full-X)
Viaccess - Seca (auto update) - CryptoWorks – Irdeto (including NOVA) Ready for Full-X smartcard
Update smartcard :
Loader +
sc_NB1000_RD2_X_SCS_v2088Da (18/05/04)
Switch on your NEOTION Box and go to the Receiver Information menu. The first line is entitled SW version and begins by SA or SB followed by a number. You can know the firmware you must take :
|
NB3000 RC2 Model with FreeX-TV reception on Hotbird and Astra
Viaccess - Seca (auto update) - CryptoWorks – Irdeto (including NOVA)- Conax (with Titanium for Canal Digital North Europ)
Ready for Full-X smartcard
Update smartcard :
Loader +
sc_NB3000_RC2f_FM_SCS_v12050a (19/05/04)
Update RS232 (take the 2 files):
1_NB3000_RC2f_FM_SCS_12050a +
2_NB3000_RC2f_FM_SCS_12050a (19/05/04)
Nagra – Irdeto – CW + gold cards Ready for Full-X smartcard
Update smartcard :
Loader +
SC_NB3000RC2f_FM_XM_SCS_RC2f_12046d (25/03/04).
This version may not work if you have an old version of the box. Use then the following one.
(for old Skybox bought in November-December 2002)
Update smartcard :
Loader +
NB3000_RC2_europe_flash_smartcard (20/01/04)
Update RS232 (take the 2 files):
First_NB3000_RC2_europe_flash +
Second_NB3000_RC2_europe_flash (22/01/04)
NB3000 RD2 Model with FreeX-TV reception on Hotbird and Astra
Seca2 for official cards (auto update) + Titanium cards for Skyitalia + Irdeto for NOVA
(test version, not final version) Ready for Full-X smartcard
Update smartcard :
Loader +
SC_NB3000_FM_XM_SCS_RD2_seca2 (23/03/04)
Update RS232 :
Ser_NB3000_FM_XM_SCS_RD2_seca2 (23/03/04)
Viaccess - Seca - CryptoWorks - Irdeto Ready for Full-X smartcard
Update smartcard :
Loader +
SC_NB3000_FM_XM_SCS_RD2_12846a (30/03/04)
Update RS232 :
Ser_NB3000_FM_XM_SCS_RD2_12846a (30/03/04)
NB3000 RC2 Model with FreeX-TV reception on NSS6 (south east asia)
Seca2 auto-update, seca2 titanium (SkyItalia & Digital+), ZeeTV
(test version, not final version)
Update smartcard :
Loader +
SC_Asia_3000_RC2_ird-ck_cw_via_zee (05/04/04)
|
|
|
|
|
|
|