Milo's Library

After two weeks of work, this is what I have done. It's 16 guage, stainless steel, 3/8 inch inner-diameter european 6in1 shirt. Well its not really a shirt because it only covers my chest. I need more steel.	This is a side shot of my shirt. the sleeve is in the same european 6in1 pattern as the body, but it hangs that way for some reason.	This is a little piece of micromaille that I did. Its 24 gauge (AWG) brass with a 3/40 inch inner diameter. I know there are errors but I really, really, really don't want to try and fix them.
This was my first project, a hackysack. I used galvanized wire but i forget what guage and inner diameter it was.	This is a side shot of the hackysack which is a eruopean 4in1 weave.	This is a nice piece of dragonscale that I made. It was made using 16g (AWG) brass with a 3/8 inch inner-diameter and 19g (AWG) stainless steel with a 1/4 inch inner-diameter. The mixing of the metals make it look really good.
Can somebody please tell me what this weave is?!? I made it by accident, but it looks cool.	This is my main arsenal of tools. Shown is a pair of Knipex and two Craftsman pliers.	This is a somewhat loose cube that I made in about a half hour. Its a doubled 14g stainless steel 3/8 inch inner-diameter 3x3 cube. Pretty fun to play with.
This is an example of a fullpersian weave. I used 16g (AWG) copper with a 3/8 inch inner-diameter.	These are two Half Persian 4in1 weaves. The bigger one is 16g (AWG) copper with a 3/8 inch inner-diameter. The smaller one is 19g (AWG) stainless steel with a 1/4inch inner-diameter.	This is a nice Half Persian 3in1 weave. the ends tend not to keep their shape so i put a small brass ring on each end. I used 14g stainless steel with a 3/8 inch inner-diameter.
This is a really hard weave to figure out. It's Lorenzo's Halfpersian 4in1 weave. It looks cool, but when you pick it up it twists badly and messes up the border rings.	This is a nice patch of Kingmaille. Its basically doubled 4in1, but it has the potential to be really strong if you use the right metal. Since i was just practicing, I used 16g (AWG) brass with a 3/8 inch inner-diameter.	this is a cool weave calle Emperors weave. Its basically european 6in1 doubled. Bigger rings would work better with this weave. I used the same stuff as the Kingsmaille
This here is a weave created by me calle Iguana Scale. Its a pretty tight weave that uses 3 rings sizes. Shownhere ia a weave using 14g 3/8in i.d., 16g 3/16 i.d., and 16g 1/4 i.d. This weave looks like it would be good for a belt.

(Some of the pictures on this site were taken using a camera and a digital magifying system sperate from the camera.)