"We talk to the OS ... so you don't have to ..."

Lalim Parallel Port Control(Ver 3.6.0)

Lalim Parallel Port Control can control hardware through the parallel port (printer port) and can also control a remote PC parallel port through a network.

Most of engineering industry using PC to control hardware with using additional I/O card but with Lalim Parallel Port Control you can use your default printer port controlling external device such as switching on/off light or control electronic devices. What does this program [does is] trigger the parallel port (Printer port) 's data pin by your command. For example when you trigger pin2 , your printer port's pin2 becomes +5 volt . With this +5 volt , you can built your own electronic circuit to drive other external device. You can also built a simple circuit to test it by connect a LED with 1 kohm resistor direct to it pin.

Lalim Parallel Port Control requires a certain knowledge of electronics and if you are not comfortable with a soldering iron, or don't know what a 1k resistor is, then it is probably advisable that you do not attempt to use this program.

If you are capable working with DC electronics, Lalim Parallel Port Control allows you to build remote-controlled, or timed, devices for your home or office – turning on or off the air conditioner, adjusting lighting, opening & closing windows, monitoring burglar alarms, and more.  

Just download and run, no installation required.  

• Version 1.0.0

• Control remote computer 's parallel port in network 

• View computer 's parallel port status

• Has interface same as parallel port (For easy viewing)

• Show binary input / output

• Control data pin 2 to pin 9  

• Work on Win9X and NT

• Version 2.0.0

• User can write script on the program  for running light.

• Version 3.0.0  (23/07/2003)

• Work on Win9X/ME

• Version 3.4.0  (02/03/2005)

• Support input control (Pin 10,11,12,12 and 15)

• The program stay in system tray when minimize. 

• Work on Win9x/ME/NT/2000 and XP.

• Add in auto timer to update status.

• No more flicker on display when scripts is running.

• Parallel interface circuits added. 

• Version 3.5.0  (28/05/2007)

• Can set password for server 

• Version 3.6.0  (20/04/2008)

• Support Windows Vista

 To get the full effect of this it is helpful to have a small amount of electronics knowledge.  You could do this simply by sticking the positive side of a LED into pins 2-9 on your parallel port and the negative side of the LED into pins 18-25 if you don’t have much electronics knowledge.  However, below is the schematic for a simple array of LED.  You could build this very easily if you know how to solder.

Warning: 

When experimenting with any of the IBM PC I/O Ports , always use a 1k ohm 1/4 watt resister to buffer all of the signals on any of the parallel printer port connections. you can damage the parallel printer port of your IBM PC computer.

Lalim Parallel Port Control Pro - SOFTPEDIA "100% CLEAN" AWARD

This software product was tested in the Softpedia labs on: 29 May 2007

Softpedia guarantees that Lalim Parallel Port Control Pro is 100% CLEAN, which means it does not contain any form of malware, including but not limited to: spyware, viruses, trojans and backdoors.
 

Note: For NT,2000 and XP user , for the first time run the program , you must logged in as administrator.  Are you the only user on these machines or do you have others who have their own accounts? If you are the only user then  you are the administrator.  If your PC shows missing mswinsck.ocx  Click here

The source-code of below programs which written in Visual Basic 6 available at USD500.00 

If you need custom made program contact lalim923@hotmail.com 

Download Lalim Parallel Port Control  version 3.6.0 (Freeware)(549kb in Zip)

Download Lalim Parallel Port Control Professional version 3.6.0 (Shareware)  (557kb in Zip)

Buy Lalim Parallel Port Control Professional through Regsoft USD30.00 

 

Back to Homepage