Rudder repair part 1

This is the rudder that was bent when the boat was sitting in a shallow slip.

Back to our Grampian main page

This is the rudder and shaft before I cut it out.

Rudder Repair part 2

This is the what the inside of your rudder looks like on the G26. I cut this out with a grinding disk on my drill. I took a little hunting before I figured out how it was set in the rudder.

This is showing the shaft totally removed from the cavity. Now I need to have the machine shop make a new one. After that, I need to find out the best way to fill this rudder cavity back in so it is tight.

repair continued....click here