 |
| Chee Po's Flying Crank Ghost |
| Due to the Fact I'm only 15 and I have a very tight Budget I built my own version of the Flying Crank Ghost. But this version can never live up to Dougs Version. I have made this one and only its head moves. I use this one in a picture window in the shop next to my Aunts House. Since she has a bigger front yard and more space she lets me decorate her yard. So I'm going to try to explain this the most I can. |
| Your Materials: 1 Wig Head 1 to 3 Yards of Sheer fabric (the kind they use in wedding gowns) 1 Spool of Heavy Duty Black Thread 1 Oscillating Fan 1 2 ft. Black Light Black Light Sensitive Paint 1 Eye Hook 1 Paper Clip |
|
| 1. Take your fan and turn it completly one way. then take your paper clip and attach it to the most outer edge mine was on the right of the picture. then add a very long peice of thread to the clip. 2. Now add an eye hook above the area the head will be. Now take the thread and run it through the eye hook. and to that end attach a safety pin. 3. Now take your Head and paint it with UV paint. Now center your head in the middle of 1 yard of fabric. you can take the other yards and Layer them on top. 4. With your safety pin insert it in to the top of the head at an angle. 5. Pin the back 2 corners up to each side of where you are putting it These will be the arms. 6. Add a Black Light at the very bottom of the ghost. Now turn on the black light and the fan make sure it is in the oscillating possition. 7. If you want the head higher or lower move the fan closer or further to the ghost. 8. Turn off all the lights and enjoy. |
 |
 |