PCpTray - Asus PC Probe v2.2 Utility

Freeware for Windows XP

NOTICE: GeoCities is closing on October 26, 2009.
On October 26, 2009, this site will no longer appear on the Web.
Edgemeal New Home Page

PCpTray for Asus PC Probe v2.2x (32-bit)

About PCpTray
PCpTray is a free add-on (icing on the cake) for Asus PC Probe v2.2.x.

What does it do?
* Starts Asus PC Probe v2.2x if it's not already running.
* Displays the current CPU & MB temps in the system tray.
* CPU thermal alarms adjustable from 0°C to 80°C.
* CPU overheat protection, run a file and/or shutdown PC (from 10°C to 90°C)
* Two adjustable dashboards to view Asus PC Probe values.
* and more..... See my terrible Screen Shot ;)

What's required to run PCpTray?
* An Asus motherboard with Asus PC Probe v2.2.x health monitoring software installed.
* One single-core or one dual-core CPU.

Download PCpTray v1.20 (200 KB - Aug 23rd, 2006)

Other Downloads

PCpTray Lite Revised Edition

* A really simple add-on for Asus PC Probe v2.2x.
* Displays CPU temp in tray (or toggle the CPU and MB temps).
* Choose black or white tray icon (background is transparent).
Download PCpTray Lite v1.00 (17 KB - August 01, 2007)

PCpTray 2007
* A simple add-on for Asus PC Probe v2.2x.
Screen Shot - Download PCpTray 2007 v1.04 (29KB Nov.06.2006)

Asus PC Probe 22502 32-bit (4.10 MB - January 29, 2005)
Download Asus PC Probe v2.25.02 (For use with PCpTray)
(The file is located on Asus's Taiwan FTP server. Downloading may be slow at times.)
.

===================
Terms of Agreement:
===================

By using the included Freeware, you agree to the following terms...

1) You may use this software freely and with no charge.

2) You MAY NOT redistribute this software (for example to a web site).

===========
Disclaimer:
===========
Users of this software must accept this disclaimer of warranty:
The software is supplied as is. The author disclaims all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The author assumes no liability for damages, direct or consequential, which may result from the use of said software.

Q: When I run ASUS PC Probe in Windows 2000 or XP, I get the error message “1. Cant Open Service Control Manager; 2. Can’t Create Driver Service; 3. Can’t Open Driver Service; 4. Can’t Load asmil-twlo", then there is no display on program interface or it even not run. What’s wrong?

A: ASUS PC Probe only works properly when you log in the system as Administrator. If you are a limited user of the system, you will run ASUS PC Probe with the error that is mentioned in the question. It is the nature of this software because the function of it is related with the security of the system and only the Administrator can make change of it.

Q: I have been running pc probe for quite awhile without any problem. Now when I boot up I get an error message. I uninstalled probe and then reinstalled but I still get the same error message on boot, access violation in module "cp3240mt.dll", I am running WinXP Pro. Any help will be appreciated.

A: Try this..., go to the folder where you installed PC Probe and open the RECORD folder (e.g. C:\Program Files\ASUS\Probe\Record) , and delete all the files in this folder, they are created when you enable the Recorder in Asus Probe's History thingy. Once you clean out this folder the error message should go away, at least they did for me! :-) HTH

Q: I try to install pc probe on my a8n-sli deluxe, after I choose a directory to install it returns to windows without finishing the install.

A: I had a similar problem. In my case, the installation failure occurred because I tried to install Probe under Program Files on a drive other than C:, which is Probe's default installation location. Finally, I just let it follow all the defaults in its setup program, and it installed instantly.

Q. When I switch users without logging off things go out of whack.

A: Likely you are running two instances of Asus Probe in this situation if both users have Probe set to start automatically. Probe doesn't support multiple copies running, it will cause corrupted readings. It's best to run only one health monitor, even if they are not the same program they may still conflict with each other.
.

Thanks for visiting Edgemeal Software