Cat Sofa Pattern

Done on Bond knitting Machine Key plate #2 Gauge18 st X 27 rows = 4.50 inchs Needed Supplies Foam rubber 1-18 x 13 in 4 in thick 1-18 X 12 in 2 inch thick Yarn I used about 20 oz of red heart yarn I also wrap each piece of foam with quilt batting ( but you don't have to) Base of bed cast on 80 stitches with waste yarn knit 6 rows  set row counter to 000 knit 210 rows with main yarn knit unto 6 rows wy  Take off and turn so top and bottem are at top and inside is facing you sew long seam Sides Of base  measure 2.5 in on each side of seam place marker rehang the stitches between markers on 27 needles  set row counter to 000 knit 80 rows cast off unto 6 rows waste yarn sew the seams to close, all the way around. Next side  do same as first but leave one long seam open to put the foam rubber inside. Back of bed cast on 80 stitches in waste yarn knit 6 rows  set row counter to 000 knit 162 rows  cast off unto 6 rows waste yarn  take off bring top and bottem together with inside facing you , sew seam closed. Sides of back Measure 1 inch on each side of seam place marker rehang stitch betweem markers on 9 needles knit 67 rows cast on to 6 rows of waste yarn take off and sew the seams to close Other side of Back Do the same as the first but when you sew leave one long seam open to put the foam rubber inside..  Arms Make 2 Cast on 36 stitches in waste yarn knit 6 rows set row counter to 000 Knit 67 rows in main yarn cast off unto 6 rows of waste yarn Bring top and bottem together so inside is facing you sew seam Sides of arms Measure 1 inch on each side of seam place marker rehang the stitches between markers on 9 needles knit 40 rows in main yarn cast off unto 6 rows of waste yarn take off and sew seams closed on the 3 sides Other side  Do the same as first but leave one seam open to put in foam rubber Finishing  Wash all pieces before putting together.                   cut foam to fit each piece Mine was Base 17 inches X  12 inches                                                                           Back  17 inches  X 10.5 inches                                                                           Arms   8 inches X   3.5 inches Put foam in each piece and sew last seam closed.  Attatch back to base  measure 2 inches in from edge sew front seam, and remaining seams.   Measure 2 inches in on each side and sew arm to base same as for the back. Then sew arm to back. Repeat for other arm Done. copyrighted by Michelle Wayman 2001 Please don't post to any other site with out permission.

E-Mail Me